I need cone to cone automatic winding machine with 6 or 8 spindles in Kano Nigeria. If is available I will like to know how much and the video of the ones available. 

I inquire and request a quotation for a Winding Machine for Binocular Core.

Inquiry about Wire Coil Winding Machine for Cable Wire Binding

we have an interest this cooling machine. 

We are planning to upgrade our LV Foil winding machine and I would like to know the price of such a machine from your company. 

 Please provide a commercial offer and specify the delivery time for the Electric motor according to the following technical characteristics: ENGINE: ELECTRIC TYPE: YVP 200L4 POWER: 30 KW REVOLUTIONS PER MINUTE: 1460 WITH COOLING FAN TYPE G-200A 0.21 KW 1350 RPM/mines FOR THE ROCKING MACHINE "CYJ10-3.0-37HY".

Hi
Want to know prices of foam machines
Continuous pre expanded machine
Air cooling block moulding machine CM/L6000
Steam and air tanker
Boiler
Each machine how much

I would like a quatation for the following machines
1. Earth Resistance test Machine, 2. AC voltage withstand test 3. Contact resistance Machine 4. SF6 Dew point precision tester 5. Circuit Breaker timing test able to do Open-Close-Open 6. Tan Delta Machine 7.  SFRA Machine. 8. Winding Resistance Tester 9. On Load Tap Changer Tester 10. Short Circuit Impedence Test 11. Voltage Ratio and phase displacement tester 12. IR-Insulation Resistance tester

i need information regarding pipi winding and tank winding machne

please make a commercial offer for Machine tools Pile winding machine for winding and welding heavy pile frames. Wire diameter, mm.3-5 mm (Bp-1, S500) 6-8 mm (S240) 2. Diameter of longitudinal rods, mm. 10-25 3 Pile cross-section, mm 300x300, 350x350, 400x400 4.Wire pitch, mm. 50-300 (smoothly) 5. Maximum pile length, m. 12 6. Number of longitudinal rods, pcs. 4 Welding machine for production of special and masonry meshes of any configuration, frames. 1. Diameter of longitudinal reinforcement, mm 4-16 (S240, S500) 2. Diameter of transverse reinforcement, mm 4-16 (S240, S500) 3. Step of longitudinal reinforcement, mm 50. 100, 150, 200, 250, 300 4. Step of transverse reinforcement, mm 50, 100, 150, 200, 250, 300 5. Maximum welding width, 2600 mm 6. Maximum welding length, mm unlimited 7. Maximum working speed (cross rods/min.), pcs. 90 Hydraulic machine for bending reinforcement mesh of frames. 1 Maximum diameter of reinforcement, mm 16 2 Maximum mesh width, mm. 3000 3. Maximum bending angle, degrees 180 4. Diameter of transverse rods, mm. 4-10 5. Steel strength, kt/mm2 From 45 to 85 6. Bending drive - hydraulic

Need Toroidal  coil winding machine for winding coils using winding wire 0.210 mm Qty.  3 nos. 

你好你有自動繞線機

Inquiry About Welding aluminum foil winding machine

lollipop line, complete. kitchen, batch roller, rope sizer, forming machine with die, cooling shaker, single twist wrapping machine. capacity 500kg/hour candy line complete. kitchen, batch roller, rope sizer, forming machine with die, cooling shaker, single twist wrapping machine. capacity 500kg/hour ball gum line - 100kg/hour

We have plan to setup cooling pad production line 

Inquiry About Coil Winding Nozzle, Material : Tungsten carbide

We would like to request a quote with your best conditions of Price and Delivery Time for the items as below: Cooling machine for laser treatment
air cooler, cool system, cold wind, cold, wind, cooler

Inquiry About Coil Winding Tensioner Electronic Tensioner for coil winding machines MET-B

Inquiry for Cheese Winding Machine Requirement
this is my final product
i want winding machine for this product

hi
Please can you quote on Cummins engine parts as per details provided on attached documents or complete engine with all the accessories. This engine is in a JCB backhoe loader machine. Wheeled Loader – JCB Model: 426ZX Serial #: JCB42670C81232185 Engine Make: Cummins Engine Model : BTAA5.9C Net Power : 150hp (106KW) MAX Torque: 2200  RPM Displacement 360.1 CU IN (5.9Litrs 1.  Pump ASS’Y, fuel injection                           17/920400                         1 2.  Injector ASS’Y                                                      17/920200                         6 3.  Pump ASS’Y, water cooling pump              02/910890                         2 4.  Belt, V-Ripped alternator belt                       02/911503                         4 5.  Relay, heater 24 volts                                       716/23400                         1 6.  Holder for fuse                                                     716/21900                          1 7.  Fuse, 125Amp    

PLease send quote for Model Number: SafeHerm-2500/13.8 Usage: Power Distribution Phase: Three Coil Structure: TOROIDAL Coil Number: Two windings Product name: Power distribution transformer Type: Oil immersed type Rated capacity: 2500kVA Primary voltage: 13.2kV/13.8kV Secondary voltage: 400V/230V Frequency: 50/60Hz insualtion voltage: 75kV/35kV Standard: IEC60076 Cooling Method: ONAN Vector group: Dyn11, Yyn0

Inquiry About High-tech vertical type Hexagonal bead winding machine tire bead winder

 We are interested in purchasing a saw for cutting polymer materials. Materials information: Polymer materials of rectangular and cylindrical shape. ? The rectangular section of the cut is 80/135 mm. ? Cylinder with a cutting cross section of ?180 mm. The inner hole is ? 32mm. ? ISO 868 SHORE D hardness from 42 to 52; ? ISO 1183 from 0.98 to 1.4 kg/cm3 Hardware requirements: - The machine must be equipped with adjustable pneumatic clamps for reliable and accurate fixation of the profile. Automatic feeding of blanks. - The large diameter of the saw blade (at least 450 mm) and movable stops allow you to cut large workpieces. - The machine must be able to adjust the feed rate to adjust the optimal profile cutting mode - After cutting is completed (or in case of an emergency stop), the saw blade automatically returns to its original position (descends into the machine cabinet) - The machine must have a water cooling system, STANDARD ACCESSORIES for a deflated pneumatic pistol. Measuring roller in quantity of 1 pc. (length 1000mm). A saw blade with a diameter of at least 450 mm. - The machine must be provided with automatic coolant supply when cutting workpieces. - Electric motor of at least 4kW, 380V/3F/50Hz Saw blade (diameter/ fit) 450mm/30-32mm Disc rotation speed 3000 rpm Compressed air supply 6-8 bar, 35lit/min We are waiting for your prompt response and commercial offer!

We are looking for Temperature control Unit manufacturer, Be so kind to check our current demand and in case You have such equipment provide with Quote, please: Our Client has got Miraflex printing machine (tea packs laminating process), The Drum (approximately 2600x1300 mm (diameter\\width)) carries the laminating film, The Drum is heated with heating water, the water temperature should be kept at 34 degrees C, accuracy  \\– 0.5 degree C, For current moment it is provided by German Temperature controlunit, the Brand is ThechnoTrans  , the unit type is kappa.t 18/58 FU, the main characteristics are: Temperature control range: 15-40 degree  make it 34degree Cooling/heating capacity: 58Kw\\18Kw Flow rate: 10-14m3/h Cooling media rate: 3.8 m3\\h Pressure: 1-1.5bar Reservoir: 56L Media: facility water Extra information, technical description, existing photo machinery would send separately as soon as you would reply to my email