I am looking for door press machine

Looking for a machine to press hemp fiber into wood

Need to quote parts of Heidelberg Offset press GTO 52 2002

I'm interested in your gear and cotton pressing machines.

We are in requirement of 5 T Bell Drop Hammer with proper sow block (installed). Will need a quote for 700T Trimming Press.

Want to order a ring die for your granulator. Need a die and press rollers for granulator 250

Send me the quotation. Quotation for 75 and 100 ton four column deep drawing press... Also the other capacities in the same model

I'm looking for MAYLAR sheet for hot plates protection. Apart from hot press machines, I'm also looking for the MAYLAR sheet to protect hot plates surfaces.

Need complete automatic pasta production line with 2 ton /hour output capacity. Want to buy a complete line including preparation section, press section, different types of dryer and final packaging section.

I need friction screw forging press

I'm interested in buying pressed skateboard decks wholesale but want to make sure of quality. Would you be willing to sell a sample? I would like to buy a large number of decks wholesale but want to check quality. Would I be able to buy a sample? Do you have a diagram with all shapes and sizes you offer? Also is this the price for 7 ply pressed maple deck?

Sourcing Water Jet Loom M/C Power Press - JW 871 (6 Sets)

could I get product catlogue with tech specs, dimensions, price & delivery terms

Seeking a customizable panini press with standard square grill plates, engraved logo on the machine (printed logo if available). Order quantities: 1 unit for initial testing, 10 units for launch phase, 50 units for subsequent expansion. For high - frequency operation in food kiosks and delivery to Spain. Request a detailed quotation including unit pricing based on quantity, available customization options, production and shipping timelines, payment terms.

Inquiry About manual oil press

Looking for a high speed lamination press machine. H Frame, with air clutch, 180 - 200 rpm. 60 or 80 ton. Waiting for product suggestions in line with the specified needs.

I am interested BY300x150 heated press with an automatic loading and unloading system. I need a sandwich panel press. Panel size 3000x1500

need belt filter press, have some pic to send

Looking for a sludge dewatering machine with a moisture content of less than 30% for the screw press type or after secondary extrusion. Operating a pig manure treatment plant.

We would like to purchase honeycomb aluminum with the following specification: Aluminum honeycomb core - 5000 or 2000 series of aerospace grades - Cell size (distance between two parallel sides of hexagon): 8mm - Width of each side of hexagon: 5mm - Thickness of hexagons (vertical value): 3cm - Foil thickness (honeycomb core wall thickness): 40 - 50micron. Dimension of pack: - width (in a pressed and packed condition): 120cm - length (in an elongated condition): at least 240cm. Qty: 500pcs. If you can supply or produce this product in either expand or packed condition, I would like to have a quotation.

Looking for a reliable manufacturer for two versions of a 200 - ton forklift tire press based on the attached specifications. Requirements for Mobile Tire Press Version: Installed on a trailer, towable by a standard pickup truck; Electrical configuration: Single - phase or 3 - phase, compatible with 208V / 220V / 240V; Minimum 200 - ton pressing capacity; Include a lift table for loading and unloading forklift tires (if available); Maximum tire size: up to 40" in overall diameter; Capable of handling solid tires up to 9.00 - 16. Requirements for Stationary Tire Press Version (In - shop use): Fixed installation; Electrical configuration: 575V, 3 - phase, compatible with a 200 AMP panel; 200 - ton pressing capacity; Include lift tables (if available); Same tire size capacity as above.

Plate and Frame Type Filter press. Filter press Cake Holding Capacity: Approx 350-400kg.

Inquiry for ECTFE film for use in a molding EMC coating process (anti - current purpose). Required film: ECTFE film (equivalent to TBM series, 70??m thickness). Usage size: 228mm width ?? 260 meters length ?? 0.07mm thickness. Monthly usage: 100 rolls (RL). Processing conditions: The film is pressed between upper and lower metal plates heated at 175?°C each, actual temperature reaching around 200?°C. Ask for available specifications, lead time, and MOQ.

Request a pre - press thermoforming offer. Material to be thermoformed: cross - linked polyethylene foam with density from 30 kg/mc to 100kg/mc, thicknesses from 5 mm to 30mm. Automatic moulding and roll feeding. Min 12ton with mould holder dimensions 1000mm x 500mm. Temperatures on oven set below and above approx. 200???????°C. Moulds both cooled. Mould holder opening at least 500mm.