Before purchasing photopolymer plate, want to know Solid type photopolymer plate specification. Looking for 1,000mmx1,000mmx0.5mm plate which can be exposed by exposure unit(with light) and image film. Need ASAP for sample test. Looking for photopolymer Plate(Red Color) with similar specification. Usage: Photopolymer Plate for pad printing. Specification needed: Base Material - Steel, Color of raw plate - Red, Total thickness(mm) - 0.52, Plate hardness(Shore D) - 90, Relief depth(mm) - 0.020, Tonal range(%) - 5~95 at screen ruling of 150l/cm, Main exposure(min) - 1.0~5.0, Washout time - 2.0, Washout temperature - 20℃, Drying time at 80℃(min) - 20, Post exposure(min) - 8~10.

Inquire about the possibility of manufacturing fine blanking die components. The main materials are SKH51, STD11, and various types of powdered high - speed steel, with a hardness of approximately Rockwell 60 HRC. Delivery location is in Alabama, USA. Plan to place an initial order of about 15 piercing punches for testing. Ask for quotation and estimated lead time.

Received an inquiry from a client for 2 devices of the “In-line Annealing Machine” required for the production line. Technical information: working principle - non - contact induction heating annealing; suitable for square or round conductor; solenoid inner diameters 15mm and 25mm with internal ceramic tubes; maximum annealing temperature 650°C; temperature control modes: automatic with line speed tracking and local manual control; main power supply and operation frequency to be mentioned; cooling water supplied 150 L/min, inlet temperature below 35°C; device should have touchscreen interface; main equipment dimension to be specified; contract and bank guarantee for minimum 12 months required; complete documentation and software backups to be provided; specify the brand and manufacturer of all equipment and send catalogue and technical specification; determine the price of each spare part separately. 

We are looking for 5 wet benches for our cleanroom laboratory. Main requirements: ? Material: White Polypropylene (PP) ? Dimensions: 2500 × 1000 mm ? Acid

We operate a factory producing artificial stone panels and are looking for production line solutions for both of the following processes: 1. Spray cement-based adhesive onto EPS/XPS boards (20–40 mm thick) and laminate fiberglass mesh (120 g/m2). 2. Apply fiberglass mesh (120 g/m2) onto EPS/XPS boards (20–40 mm thick) followed by a cementitious (polymer-modified) base coat using screed/doctor blade or knife-over-roll. Both processes should meet the following main parameters: - Working width: 1,250 mm - Production speed: ~8 m/min (~600 m2/h) - Controls: PLC, recipe control, thickness

We need CNC machine with vacuum table 4200*1600mm no 1

Looking to purchase a replacement for an industrial joystick with specifications: Model: YJ100 - I - 1 - P1(10K) - 03 (589) - HD2; Sensor Type: Potentiometer (10 kΩ); Axis: Single - axis control; Micro Switches: 2x Omron SS - 5GL2 limit switches; Voltage Rating for Switches: 5A, 125/250VAC; Application: Crane and hoist control (hydraulic system interface); Material Requirement: Durable industrial - grade housing, metal shaft preferred; Mounting: Panel - mounted with PCB connection interface; Output: Analog voltage output from potentiometer, digital signal from switches

We are currently looking for a complete hot-dip galvanizing line (small unit) suitable for treating medium-size steel components and small parts. The main objectives are to ensure corrosion protection for our steel structures, meet international standards for hot-dip galvanizing, and increase our competitiveness in tenders requiring galvanization. Technical requirements (preliminary): Capacity: small/medium production scale (adapted for workshop use); Suitable for parts from small fittings up to structural elements (~6–8 meters max); Compliance with international galvanizing standards (ISO, ASTM, etc.); Energy efficiency and environmental protection features; Turnkey solution with installation

Looking for a high - quality robot arm to integrate with an injection molding machine (150–300 tons). Require a full - servo robot with 3–5 axes, using top - tier components. Key requirements: Axis travel - Z - axis: 1500–1700 mm (horizontal beam), X - axis: 800–1000 mm (in/out), Y - axis: 1000–1200 mm (up/down); Payload: 5 kg max; Servo motors: Japanese brand (Mitsubishi, Panasonic…); Pneumatics

We need wide angle fabric fabric manufacturing rapier looms. This special rapier looms for wide - angle woven fabric. Do you manufacture? Provided is a special rapier loom for wide - angle fabric. A main machine framework (14) and a warp feeding machine frame (2) are arranged obliquely at the angle of alpha. A conjugate cam mandrel (6) is fixedly provided with a beating - up bevel gear (7), the beating - up bevel gear (7) is meshed with a main shaft bevel gear (15) on an oblique main transmission shaft (18) in a transmission mode, the main transmission shaft (18) drives the conjugate cam mandrel (6) to rotate, the conjugate cam mandrel (6) is fixedly provided with a conjugate cam (38), a small swing arm (39) is ejected to swing and is fixedly connected with a rocker (30), the rocker (30) is movably connected with a connection rod (29), the connection rod (29) is connected with a sliding block (19) and drives the sliding block (19) to drive a guide rail beam (21), a weft insertion guide rail (20) and a reed (22) to move on a linear guide rail (32) in a reciprocating mode, the linear guide rail (32) is fixed to a beating - up box

We are looking to procure a laboratory-grade cut-off (disk) saw designed to meet the following technical specifications: ? No?load speed: approximately 3,800?rpm ? Disk outer diameter: around 400?mm ? Maximum cutting depth: ~135?mm ? Manual Z?axis (vertical) movement ? Minimal heating of the cut surface ? Fast cutting time, high operational speed ? Simple and fast disk change ? Low technical maintenance ? Cutting chamber design ensuring maximum safety and minimal dust formation. Please provide the following information for models fulfilling or customizable to these requirements: 1. Full technical specifications 2. Pricing (FOB Shanghai and CIF Tashkent) for MOQ of 1–5 units 3. Lead time, payment, delivery terms, warranty 4. Safety and dust?control features (e.g. enclosure design, filters) 5. Available accessories or upgrades 6. Certifications (CE, ISO, etc.), brochures or technical datasheets

I want 4-axis cnc router, 8000, 1

Ask about the quotes for 1 main harness and 1 fuel tank. LWGMDF749CA002048 is the vin. 

We would like to import steel / composite LPG gas cylinders to Syria. Our main interest is in sizes 12.5 kg. and 24 kg. but other sizes would also be of interest. Kindly supply us with your prices and full information and let us know your minimum quantity of order.

Inquiry About Schneider SM6-24-GBC-A Schneider Ring Main Unit Schneider SM6

Regularly install overhead cranes in industrial projects and are looking for a reliable supplier of winch motors and other crane drive motors (main hoist, auxiliary hoist, cross travel, long travel, brakes). Sent an email with full technical specifications (30T/5T double girder crane) and request for quotation. Request to share best offer and lead time. Explore long - term collaboration. Need one immediately and additional 14 during the year. Shipping to Indian port.

In bulk I want 50 to 100 carton within 15 to 20 days. Ask about main market and particular area in Wenzhou for plastic buttons.

Looking for an OEM manufacturer to produce main components of RC aircraft models, including fuselage, semi - wings, horizontal and vertical stabilizers. 

Need a Crankshift and Main bearing for an engine YN4100QBZL, give price

Need led bulb 5w /7w / 15w / 20w main order quantity 500 pcs raw material

CONTACTOR,MAG,LS90K4,AEG,MGNTC,400V,125A. ADDITIONAL SPECN : 4 POL. APPLICATION : DISTN. AUXILIARY CONTACT CONFIG : -. COIL VOLTAGE RATING : -. CONTACT CURRENT RATING : -. CONTACT VOLTAGE RATING : -. CURRENT RATING : 125A. DIMENSION SIZE : 225X210X246 MM. HAZARD AREA CLASSIFICATION : -. MAIN CONTACT CONFIGURATION : -. MANUFACTURER NAME : AEG(ABB). MODEL NUMBER : LS90K-4. NUMBER OF POLE : 4 P. POWER RATING : -. TYPE : MGNTC. VOLTAGE RATING : 400V. 910-304-465-00 AEG LS90K-4 Contactor, 90kW @AC-3, 4-pole, Coil 220-250V 50Hz, 277V 60Hz. Note:IF REQUIRED ONE IS OBSOLETE REPLACEMENT IS ACCEPTABLE.

I'm looking for a good K47 capsule (34mm), maybe 10 items by 10 items. Also interested in CK12 (10 items maximum). Want to know if it's possible to buy a sample before the main order. Also need a very good omni electret capsule under 16mm diameter. I'm a small company and just born, and I'm checking first, not in a hurry.

Request a quotation for Filter High Flow CUNO HF40PP005A01 (1UNIT). Main Part: High Flow Filter. Other specs: 5 Microns. OEM No.: HF40PP005A01. Brand: CUNO. UOM: 1EA = 1PC

Aluminum Tent frame roof cover HS CODE: 6306220090; Size:15m width,30m length,3m side height,450m; Main frame structure: Hard pressed extruded aluminum alloy T60l61/T6, no poles inside,aluminum profile :166*88*3mm; Roof cover :White 850g/sqm pvc fabric; Side wall : white color 650g/sqm pvc fabric with clear pvc windows; Bay distance :5m; With full accessories, hot galvanized steel accessories and parts; Wind resistance level: 8 - 10km/h; I would like a quotation for 1 tent