Looking for a replacement piece for a car we bought. It part is 24v555 40000rpm high speed drive motor gearbox ,voltage: dc 24v; speed: 40000rpm ;shaft hole diameter: 19 mm

We are looking to procure high-quality machinery for producing luxury gift boxes using leather and cardboard — especially for premium packaging, corporate gifting, and national events. We are particularly interested in the following equipment: Cardboard Grooving Machine Box Wrapping

Inquiry about Spray equipment/Polyurethane high pressure spray equipment/PU painting machine

Kindly send me your catalog. I am interested with your High Voltage Products

Inquiry about 500Kv SF6 Spring operated circuit breakers (type GL317XD) or equivalent 

We are specifically looking for: Flux-Cored Hardfacing Wire H630/10 (or analog) Copper-Coated Welding Wire ER70S-6 (Equivalent to AlfaMag 1.2mm) Technical Specifications Table Parameter H630/10 (Flux-Cored Hardfacing Wire) ER70S-6 (Copper-Coated Welding Wire) Your Product Specification Diameter (mm) 2.6 / 2.8 / 3.2 1.2 Welding Current (A) 250 - 400 50 - 300 Voltage (V) 26 - 30 16 - 26 Deposition Rate (kg/h) 6 - 13 3 - 7 Welding Speed (m/h) 15 - 25 3 - 10 Hardness (HRC) 60 - 65 N/A Chemical Composition (%) C – 5.4, Mn – 1.1, Si – 1.2, Cr – 26.0 C – 0.08, Mn – 2.0 Crack Sensitivity High Low Gas Protection Required No CO? / Ar CO? MOQ (Minimum Order Quantity) HS Code (ТНВЭД) 

We are interested in 48V 100A alternator. We need to charge 48V lead acid battery, will this alternator suit us? Please could you provide information about electrical connections to this alternator? Is any additional equipment required to operate the generator? The voltage regulator is located inside the alternator?

We look for High Voltage Sealing Tape 100 rolls. - 25mm width x 50 m long (each roll) Please send the datasheet, catalog/ brochure, and quote the price.

Inquiry about High and low voltage equipment

Hallo, We are looking to purchase physiotherapy equipment, including Shockwave, PMS, and High-Power Laser devices.

hello dear
I am looking for solar rechargeable lantern
Watts: 3-6 W Photo sensitive Water proof Luminous flux: 100-300ml Monocrystalline Voltage 5-7DCV 2-4 LED Chips/ high power Power consumption: 4-10W Life span 30,000-40,000hrs Light colour: White Temperature: 10-600C Light output angle: 360 degrees, omni directional Display screen to indicate power level
with that specifications

Dear Team, Greetings! Kindly provide your best price for below Winding Machine with lead time. 1) Foil type winding machine for aluminium or copper foils with dimensions as below, a) Thickness : 0.25 mm - 2 mm b) Width of the coil : 20 mm – 750 mm c) Diameter : 200 mm – 700 mm 2) High Voltage Transformer winding machine a) Thickness : 1 mm dia - 7 mm dia b) length of the coil : 250 mm – 750 mm c) Diameter of the coil  : 200 mm – 800 mm Kindly guide the suitable machine and share the catalog based on our above requirement Let me know for any queries.

we are seeking to cooperate with the powerful company for one on our project that support us for high pressure pump equipment .

Good Morning, I am looking for LED construction tape 50 meters 1,000 lumens per meter - 4000K 220/240V and also in 24V Features : o Type: High Voltage Construction Tape o Use: exterior lighting o Color: transparent o Power: 8.5 W/m o Luminous flux: 1000 lumens per meter o Yield: 117 LM/W o Connection: 220/240V 8A 50-60hz (2x0.75mm2) direct via CE type socket o With 6A CE 2X0.75MM2 power cable with internal junction to power up to 100m of ribbon. o With a wire tip to ensure the tightness of the tape o Broadcast angle: 160° o Color temperature: 4000K o Average lifespan: 30,000 hours at 25°C o LED type: SMD5050 o Type of diffuser/reflector: transparent o Mounting type: surface, wall, floor o Driver type: CE o CRI: 73 o Security: IP65 IK04 o Electrical class (EN 61140): II o Operating temperature: -25° to  50° C o Dimensions: H9 x L50000 x L15 mm o Weight: 5 kg While waiting for your return, Have a good day,

Inquiry about high-quality fishing nets and equipment 

hOW MUCH IS THE PRICE FOR Manufacturer price MD-303 high voltage static generator / static charge generator? CAN  YOU SHIP THIS ITEM TO iNDONESIA? HOW MUCH IS THE COSH.?

would like to have your offer for the supply of the following tender items with lead time and Data sheet. MPPT charge controller, efficiency not less than 92 %, and shall meet the following specifications. voltage, as per technical specifications Controller must utilize passive cooling (not fans); Should allow parallel operation, i.e more than one unit can be connected in parallel. Controllers to be certified CE or UL and to meet at least one for the following or equivalent standards IEC 62509 or IEC 62093; The device should have LED or LCD display. Equipped with SPD in the upstream input for each Charge Controller. Product warranty shall be 5 years. 228 Pcs MPPT Charge Controller Rated 85A - 100 A, at least 150 VDC input voltage. 148 Pcs MPPT Charge Controller Rated 100 A, at least 150VDC input voltage. 83 Pcs MPPT Charge Controller Rated 100 A, at least 450VDC input voltage. Off-Grid Inverter single phase, pure sine wave, 230 V, 50Hz as per below technical specifications. - The inverter shall produce pure sine wave form with provision for battery charger, and it can be configured individually or in parallel - Output frequency shall be 50 Hz - Designed for indoor enclosure not less than IP 20 - Maximum efficiency should be not less than 90 % at full load - To be certified to meet at least CE and UL marking and complaint with IEC 62109 - The device should be integrated with LED indicators or LCD display - It shall allow adjustment of battery voltage and charging current - The device shall allow connection to grid and/or backup generator(s) - The charging function of the inverter/charger shall include battery charging functionality   and the inverter shall be wired in ways that make use of the inverter battery charging   functionality if the installation includes either mains power or a diesel generator. - Protections required: AC overload and load short circuit, overvoltage, overheating and battery reverse polarity - The inverter shall allow internet connection for remote monitoring - Product warranty shall be 5 years. 22 Pcs 7KVA Solar Off-Grid Inverter. 69 Pcs 10KVA Solar Off-Grid Inverter. . 116 Pcs 15KVA Solar Off-Grid Inverter. 

Subiect: Inquiry Regarding Hemp Fiber Extraction Machinery, I hope this message finds you well. I am writing to inquire about the hemp fiber extraction machinery you offer, specifically the model ZGM-4401/ZGM-4402/ZGM-4403, as it appears to be suitable for our production needs. We are looking to establish a manufacturing process for hemp-based insulation panels, and this equipment could be a critical part of our operation. Could you kindly provide the following details regarding the machine: Capacity: The machine's capacity of 1-2 tons per hour seems promising. Could you confirm if this is suitable for our production needs of approximately 10,000-15,000 panels per week? Customization: We may have specific requirements for the voltage and power options. Can this machine be customized to meet specific requirements? After-Sales Service: We would like to know more about your after-sales service and warranty, particularly regarding installation, maintenance, and support.
Details of the production flow for hemp insulation panels: 1. Hemp Processing (Initial Treatment): o Hemp Decortication – Equipment for extracting fibers from hemp stalks (hemp decorticator). Please include information on the hourly processing capacity. o Hemp Milling – Equipment for milling hemp fibers into a fine material that can be used for panel production (hemp milling machine). 2. Mixing and Conditioning: o Fiber and Binder Mixing – Equipment for mixing hemp fibers with binders or resins to improve adhesion and performance of the material. o Material Conditioning – Equipment for controlling the humidity and temperature of the material to ensure optimal conditions for pressing. 3. Pressing the Material: o Hot Press – Equipment for pressing hemp fibers and forming the insulation panels. Please specify the capacity and maximum dimensions of the panels that can be processed. 4. Cutting and Sanding the Panels: o Cutting Machine – Equipment for cutting the panels to standard dimension

high voltage fuse

inquiry for supply GL 313 SF6 gas circuit breaker

Hello. I would like an offer for a KEL830/KEL160 solar panel tester  please. Regards

we urgently need you to provide us an estimate FOB and CF price of a turnkey hyper-intensive (high density stocking around 500kg/m3), RAS Industrial Fish farm with fresh water RAS to grow out tilapia and catfish up to 1kg in 4 months. The plant will be located in Douala Cameroon in Central Africa Region, by the riverside with water available between 25 to 35°C. Specification as follow: Treatment Capacity:  to be design Complete Tilapia line recirculating aquaculture system (RAS) with a capacity of 500 T/cycle and another Complete catfish line recirculating aquaculture system (RAS) with a capacity of 500 T/cycle normally containing Automatic feeding system and Design work. Furthermore, we will need your support and quotation for: a)     General planning of the complete project. b)    Detailed design of the fish pools including piping system  and the workshops. c)     Planning of the different recirculation systems according to the fish biology and production goal. d)    Planning of incoming water and waste water treatment. e)      Planning of the total energy supply (electricity, air/oxygen, cooling/heating) equipment supply. f)     Assembling of the RAS, test run and training of the staff for RAS running, training of the farm’s staff and professional start of the operationalization of the project. g)     During the initial operation and later on, we need your know-how and experience (Maybe to hire a Chinese operation director for a year). 

SIEMENS - 3AP1-DT x 3UNITS

Our customers have contacted us for a filling module from 2 ml to 200 ml in plastic bottles with screw caps. Automatic, with high dosing accuracy. Preferably with a printer. For the laboratory for the production of diagnostic systems. As well as consumables for the filling line (vials, lids).   Can you pick up the equipment and send a commercial offer?