Require air and water nozzles (atomizers) with operating liquid pressure of 200 PSI and flow rate of 2 L/min. Need technical specifications and product catalogs for evaluation. Please confirm availability and provide detailed product documentation.

We need gas mixers for integration into a gas sensor testing system. The equipment must generate precise concentrations of hazardous gases (H?S, NO, CO, ethanol) ranging from ppb to ppm levels.  

Key requirements:  
- Minimum two gas inlets (target gas + ambient/dry air)  
- Programmable control of flow rates and concentrations  
- High mixing accuracy with stable output  
- Compatibility with Winsensor WS30 test chamber  

Required quantity: 2 units.  
Additional gas inlet options would be advantageous but not mandatory.

We are seeking 150,000-200,000 prepaid smart water meters for a municipal project. Required specifications include:
- Multi-jet type with R100 accuracy class
- Minimum 10 bar working pressure and 16 bar test pressure
- IP68 protection rating
- Compliance with international flow rate standards (Qn/Q3/Q4/Q2/Q1)
- Dry or semi-dry register transmission mechanism
- Reverse flow prevention capability
Priority given to meters demonstrating higher measurement accuracy and durable construction.

We require cryogenic pumps for liquid carbon dioxide (LCO?) transfer.  
Essential specifications:  
- Fluid compatibility: Liquid CO? operation  
- Design temperature: -40 °C  
- Flow rate capacity: 8 m3/h (liquid phase)  
- Maximum working pressure: 2 MPa  

Please provide technical specifications and compliance certifications.  
Manufacturers with experience in cryogenic fluid handling systems preferred.

We require explosion proof motor compatible with high pressure pump applications.  
Key specifications required:  
- Flow rate capacity: 18m3/hr  
- Pressure range: 20-22 bar  
Must meet explosion-proof certification standards for safe operation in hazardous environments.  
Please provide technical specifications and compliance documentation.

I need an explosion proof motor compatible with high pressure pump specifications:  
- Flow rate: 18m3/hr  
- Operating pressure: 20-22 bar  

Please specify available voltage options and corresponding technical details for motors meeting these requirements.  
Certifications for explosive atmospheres (such as ATEX or IECEx) are required.  

We require a corrosion-resistant polyethylene oil-water separator system for underground installation in a vehicle wash facility. The unit must meet these specifications:
- HDPE construction suitable for 15m×6m uncovered area
- 10 L/s nominal flow capacity with 1,800L total volume
- Integrated by-pass system for overflow management
- Removable coalescing filter maintaining<5mg/L hydrocarbon discharge
- Hydrocarbon level alarm (IP65+), load-rated cover, and anti-floatation anchoring
Please confirm compliance with EN 858-1 Class I standards and provide technical documentation.

We are seeking Zero Speed Switch model ESS-II with following specifications:
- Operating voltage: 110/230 VAC, 50Hz
- Contact configuration: 2 NO + 2 NC
- Speed range: 5-5000 RPM
- Must include M30 proximity probe sensor (10-12mm sensing distance) with IP67 rating, 2m cable and LED indicator

Required quantity: 6 units. Please provide:
1. FOB Guangzhou price quotation
2. Production lead time
3. Clarification on product origin (genuine AG Electronics or OEM equivalent)

No compatibility issues with equivalent brands as long as technical specifications are met.

We require spray dryer nozzles for industrial applications. Please provide technical specifications and product datasheets for evaluation. Material compatibility and flow rate parameters are essential for our selection process. Manufacturers with relevant certifications are preferred.

Require 12V three-in-one electric steering pumps with intelligent control system compliant with ISO 26262 safety standards. Must feature integrated motor and controller with 12VDC power supply (optionally support 24VDC) and IP67 protection level.

Key specifications:  
- Hydraulic: 0.5 kW rated power (1.5 kW peak), 12 MPa pressure range, 5–9.5 L/min flow  
- Electrical: CAN 2.0 communication, 110A max current with 120A fuse requirement  
- Software: CAN-based communication supporting J1939 protocol, dynamic control via angle sensor  
- Mechanical: M16×1.5 oil outlet, 4 x M8×1.25 bolt mounting  

Applications for light-duty vehicles with front axle load ≤2 tons. Natural convection cooling required. Prefer suppliers capable of meeting technical specifications for pickup truck applications.

I need an air operated drum pump to extract oil from standard 200-liter drums and transfer to storage tanks. Require 1 unit with technical specifications, stock availability, and production lead time. Please provide details about operational pressure and flow rate capabilities.

We require FRP vessels for a filtration system with the following specifications:
- Material: Fiber Reinforced Plastic (FRP)
- Dimensions: 12 inch diameter, 52 inch shell height
- Operational capacity: 100PSI design pressure, 1 m3/hour flow rate
- Continuous service capability with backwash device
- Media compatibility: Manganese, Zeolite Coated Sand and Gravel (90-100 kg capacity)
- Additional requirements: UPVC frontal pipe network, 25mm diameter pipework, manual multiport control valve

Required quantity: 975 units
Budget range: $10,000 - $15,000 USD
Two-year warranty mandatory

We need to purchase pulsation dampers compatible with API 574 reciprocating pumps. Required specifications:
- Average discharge pressure: 5000 psi
- Fluid: Injection water
- Flow rate: 150 GPM
- Quantity: 4 units

Please confirm availability and provide quotation based on the technical parameters. Attached preliminary datasheet for reference.

We require a microbubble pump for replacing conventional saturation tanks in our DAF system. The pump must handle 20m3/h flow rate. Please provide:  
1. Commercial quotation with price details  
2. Complete technical specifications sheet  
3. Valid delivery terms for shipment to Iran  
No need for pressure/suction lift specifications at this initial stage.

Seeking a medical-grade monitoring device specifically designed for veterinary applications. Core requirements include:  
1. Must measure three vital parameters: body temperature, heart rate, and oxygen saturation  
2. Requires medical certification compliance and integrated sensor technology  
3. Essential software interface for real-time data management and analysis  
4. Components should support prototype development for veterinary clinic market  
Please provide technical specifications of integrated components and software capabilities.

Looking for reliable suppliers of NFSB100-S00/SBT02 flow sensors. Require detailed product specifications, competitive pricing, and lead time information. Please confirm availability for bulk procurement.

I need a solar-powered pump for heating swimming pools. Required specifications: flow rate of 50 cubic meters per hour and head of 15 meters. Please provide technical details and functional specifications.

Require a custom-built misting system with below specifications:

Dual-Liquid Dosing:
- Two separate 5-20L concentrate tanks
- Automatic proportional mixing (1-2% per liquid)
- Integrated with main water line

Pump Requirements:
- Stainless steel plunger pump
- 50-70 bar pressure capacity
- Flow rates: 1L/min (20 nozzles), 3L/min (60 nozzles), 12-15L/min (300 nozzles)

Nozzle Specifications:
- Stainless steel/brass construction
- 3-10μm droplet size
- Anti-drip function

Control System:
- Digital/PLC controller with dosing ratio adjustment
- Programmable misting intervals and cycles
- Optional remote/app control

Compact design preferred (≤50cm x 60cm). Pre-filtration system required to prevent nozzle blockage.}

Looking for 4 skid mounted centrifugal pumps capable of handling diesel, water, and soap solutions with a density range of 0.8-1.1. Required flow rate: 250-400 m3/hr. Discharge head: 80-100 meters. Need the units to be diesel operated. Please provide specifications and pricing details.

We are seeking preparative HPLC systems for pharmaceutical research applications. Please provide detailed specifications including column dimensions, flow rate range, and pressure limits. Systems must comply with current GMP standards and include maintenance documentation. Kindly specify available configurations and compatible solvent types.

Require 5-6 PCS RGB underwater lamps with 1" or 1 1/2" hole. Need foam type nozzles with 7 m3/hr flow rate capable of 1 meter water spray height. Immediate delivery required to Hangzhou. Both items must be packed in same shipment.

I need a twin screw pump for transferring cheese. Technical specifications required: flow rate of 2000-3000 LPM, differential pressure of 20 bar, RPM 1500, and material SS316L. Order quantity is 2 units. Delivery deadline is October 19th.

Seeking complete security system solutions for residential and common areas. Requirements include:
1. Home package:
- 1 outdoor IP camera (weatherproof)
- 1 indoor IP camera
- PIR motion sensor with animal recognition capability
- Door contact sensor
- Wearable panic button (bracelet/pendant style)
- Mobile app supporting 20+ simultaneous users

2. Common area package:
- 4 IP67-rated outdoor cameras
- IP DVR station compatible with all cameras
- App integration for both systems

Please provide:
- Individual item pricing
- Total package cost
- Estimated delivery timeline to Chile
All equipment must be interoperable through a unified mobile application.

We require 8 units of multistage submersible borehole pumps for handling aggressive liquids (acidic/alkaline media with low sand content). Technical specifications:
- Flow rate: 17 m3/h
- Head: 120-150 m
- Motor power: 9.3 kW (3×400 V, 50 Hz)
- IP68 protection class
- Must operate in liquids containing up to 40 g/l sulfuric acid and 100 g/m3 sand
No customization required. Ready to place order immediately.